2013 base model in CBP
-EX leather wrapped steering wheel
-EX Red trimmed floor mats
-2017 Honda CTR shift knob with Acuity shift boot ring kit
-eBay 6000k LED low beams
-Full interior and license plate light swap to cool white LED’s
-K&N drop in air filter
-20mm spacers (rear only)
-Freshly cut/polished with 6 month silica ceramic coating (done 12/9/19)
Turbo kit materials acquired thus far..
-eBay TD04-15g turbo w/ internal wastegate
-Ktuner reflash unit
-eBay RSX intercooler
-eBay 2.5” DIY aluminum piping kit w/ couplers and clamps
-Spectre weld on MAF adapter plate
-OEM Honda catalytic converter gasket to go between turbo and head
-eBay 2.5” DIY stainless steel piping kit for exhaust
-eBay 2.5 inch V band kits
-eBay 2.5” intermediate resonator/muffler
-ebay 2.5” inlet/3” outlet dual tip muffler
-14x1.5 thread to nipple fittings (for turbo coolant hoses)
-Turbo monkey 4AN to 12x1.5 turbo oil feed adapter w/restrictor
-eBay oil feed and drain line kit
-Russell 8AN to 14x1.5 adapter for oil drain hose to oil pan
-eBay HKS SSQV blow off valve kit
-eBay Stainless steel 02 sensor bung
-Miscellaneous piping couplers to go from turbo inlet/outlet/throttle body (different brands)
-1320 cone air filter
TD04 downpipe flange with V-band for Subaru (too big, doesn’t fit, using as reference for new flange)
Still need
-RDX injectors
-EX leather wrapped steering wheel
-EX Red trimmed floor mats
-2017 Honda CTR shift knob with Acuity shift boot ring kit
-eBay 6000k LED low beams
-Full interior and license plate light swap to cool white LED’s
-K&N drop in air filter
-20mm spacers (rear only)
-Freshly cut/polished with 6 month silica ceramic coating (done 12/9/19)
Turbo kit materials acquired thus far..
-eBay TD04-15g turbo w/ internal wastegate
-Ktuner reflash unit
-eBay RSX intercooler
-eBay 2.5” DIY aluminum piping kit w/ couplers and clamps
-Spectre weld on MAF adapter plate
-OEM Honda catalytic converter gasket to go between turbo and head
-eBay 2.5” DIY stainless steel piping kit for exhaust
-eBay 2.5 inch V band kits
-eBay 2.5” intermediate resonator/muffler
-ebay 2.5” inlet/3” outlet dual tip muffler
-14x1.5 thread to nipple fittings (for turbo coolant hoses)
-Turbo monkey 4AN to 12x1.5 turbo oil feed adapter w/restrictor
-eBay oil feed and drain line kit
-Russell 8AN to 14x1.5 adapter for oil drain hose to oil pan
-eBay HKS SSQV blow off valve kit
-eBay Stainless steel 02 sensor bung
-Miscellaneous piping couplers to go from turbo inlet/outlet/throttle body (different brands)
-1320 cone air filter
TD04 downpipe flange with V-band for Subaru (too big, doesn’t fit, using as reference for new flange)
Still need
-RDX injectors