[texCRZ]

I wanted to know if anyone knows. Are lower control arms the same 2011-2016. I bent mine and got one off a 2014 and the ball joint is sitting weird. My car is a 2011. Thanks


Sent from my iPhone using Tapatalk

 

[texCRZ]

Driver side wheel is sitting positive camber.


Sent from my iPhone using Tapatalk

 

[litz]

I'm not sure what the difference would be, but a comparison of the part numbers show a difference:

51350-SZT-A02 -- 2011, Right
51360-SZT-A02 -- 2011, Left

51350-SZT-A03 -- 2014, Right
51360-SZT-A03 -- 2014, Left

2011-2012 have a common part number; 2013-2016 have a common part number. :|

 

[texCRZ]

Update- all years are the same. I have the shop measure and both same size.


Sent from my iPhone using Tapatalk

 

[litz]

Update- all years are the same. I have the shop measure and both same size.

So, were you able to get the driver's side camber corrected, or was it something other than the 2014 part on the 2011 car?

 

[texCRZ]

Yeah I bent the strut tower so they put a camber bolt in that got it into spec. Not sure if I want to take it to a frame shop and let them pull on it.

Sent from my iPhone using Tapatalk

 

[litz]

Ah, I see. That's a replaceable part, if you have any further problems with it--but it looks like the fix is in and alignment is back in order.:grin2:
60750-SZT-G00ZZ (left side)
60650-SZT-G00ZZ (right side)

#20 in the diagram:
https://www.hondapartsnow.com/parts-list/2011-honda-cr-z-3dr_ex_nv-ka-6mt/front-bulkhead-dashboard.html

 

[texCRZ]

Thanks! I did not know that.


Sent from my iPhone using Tapatalk