Honda CR-Z Hybrid Car Forums banner
1 - 6 of 6 Posts

· Registered
Joined
·
7 Posts
Discussion Starter · #1 ·
Hey gang, I was recently in an accident which caused both of my right side hubs to go squish, which caused both hubs and my torsion beam to be replaced.
I soon(ish) realized that my once working cruise control will not set at all anymore. When the accident occured, my whole dash flipped out, (vsa and all) as one would expect, but when I got the car back everything ran and looked fine, no lights on the dash or anything. Whether this is relevant or not to my problem, I don't know, but my cruise control certainly worked beforehand.
If my speed/abs sensors were the ones to cause this, I would get a check engine light right?
I've tested both switches under my brake pedal (cvt) and they have continuity.
I've done the gauge cluster test and all of my steering wheel buttons beeped, so I'm assuming my cruise control switch is still functioning properly.
I've scowered every possible solution to this problem on the forums, checking every potential fuse.
I should note that this is the ONLY thing not working on my crz right now. Horns, hazards, tail lights ect all work perfectly. She still drives perfectly.

Am I just stuck at this point going to the dealership and getting an HDS scan? Would there be stored HDS codes that could find the problem? I fear of an electrical short, especially after looking through the crz service manual. Any help or advice would be appreciated thanks guys
 

· Registered
Joined
·
7 Posts
Discussion Starter · #2 ·
I forgot to note that I've been periodically getting an IMA light coming on, something that I'm sure is related to the hybrid cooling fan which I am fixing soon. Could be related could not be idk
 

· Registered
Joined
·
7 Posts
Discussion Starter · #7 ·
Definitely isn't the brake pedal stopper, but I appreciate the thought out response, especially since that other thread doesn't really go into detail about cvt side of it

Guess I'll be cleaning my speed sensors, any particular spray I should use? Electric cleaner aerosol or just like... Wipe it down?
 

· Registered
Joined
·
7 Posts
Discussion Starter · #10 ·
Electrical wiring Gas Electric blue Machine Auto part

What relays would I be checking though? I've only tested the horn relay and that functions.

Here's the brake switches, it looks normal doesn't it?, and yes I know that one harness is unplugged in the pic
 
1 - 6 of 6 Posts
Top