Exterior:
Seeker Front Lip
JDP Carbon Fiber Grill Cover
Spoon Turbulator
Noblesse Center Exit Exhaust iJDMToy LED Rear Reflectors
J's Racing Front and Rear Tow Hooks
Carbon Fiber Vinyl Eyebrows
JDM Red Honda Emblems
Oracal Yellow Foglight Tint
SOHC i-VTEC Rocker Panel Decals
Volk Racing Formula Lug Nuts
Buddy Club Oil Cap
Basis Sport Design Anodized Blue Radiator Stays
30% and 15% Tint
Red Tail Light Tint Polarized Wide-Angle Side Mirrors with built in LED Signals
iJDMToy 7.5w Reverse Lights
iJDMToy License Plate Lights
12w CREE LED Fog Light Bulbs
Project Mu License Plate Frame
Blue VMS License Plate Washers
Spoon Windshield Banner
Basis Carbon Kevlar Canards
Hood Dampers
J's Racing 3D GT Wing
Stickers... lots and lots of stickers...
Interior:
Clazzio Seat Covers Black with Black Suede and Blue Stitching
OEM Arm Rest
Torch Blue Blox 490 Shift Knob
H-Fit Shifter Bushings
Buddy Club Short Shifter
Mugen Carbon Fiber Mirror Cover
JDM Hazard Button
Metallic Brushed Blue Vinyl Wrapped Interior Pieces. iJDMToy Interior Lighting Package Aires floor mats
Domokun
Engine: Black Label Fabrication Cold Air Intake
AEM Bypass Valve
T1R Test Pipe
Noblesse Axle Back
Hondata Flashpro with tune from eTunez
Denso Iridium IK22 Spark Plugs
Maxbore Throttle Body
Wheels/Handling:
Spoon CR93 17x8.5 +53
225/45 Achilles ATR Sport Tires
Spoon Sports Motor Rib
Basis Sport Design Rear Sway Bar
Cusco Rear Strut Bar
Spoon Calipers
Stoptech RSX Type-S Front Brake Pads and Slotted Rotors
Tein Street Basis Coilovers
Spoon Front Sway Bar
SPC Camber Bolts
Planned Future Mods:
Limited Slip Differential
Mugen RR Style Side Skirts
Vis Racing RR Hood
T1R Mid Pipe
Spoon Rigid Collar Kit
One day, I'll take pictures of the whole car... Not with limited space... And not at 3AM...
Old Miata that I just sold.
I need to redo this emblem.
I wanted a badge that looked like it came from the factory.
Tinted my foglights on the first night that I had the car.
Debating whether I do HKS intake or Spoon Exhaust right now. I think I might to the exhaust first and wait for the turbo-kits.com CAI to come out. I want to wrap the roof in CF vinyl. I want to lower it. I really hope Tein come out with S-Techs for it. Then, at some point, get a set of 17" gold wheels for it. Also an armrest... :blink:
The filter is pretty well tucked away. I'm not too worried about driving it around in heavy rain. Although, don't do anything silly. Northibridge is selling his CAI in the classified section.
Wrapped my roof in Carbon Fiber Vinyl. A lot of bubbles.
wqkwkwkwkqqwwkwkwkwkwkwqqkqww is a machine. This is by far the most difficult thing I've ever done to my car.
I feel ya on the cf wrap. I recently just did my roof too and it was a PAIN. The sides of the roof were so hard for me to cut out. I couldn't get an even cut. The bubbles will go away eventually with heat I believe! That's what happened for me.
I feel ya on the cf wrap. I recently just did my roof too and it was a PAIN. The sides of the roof were so hard for me to cut out. I couldn't get an even cut. The bubbles will go away eventually with heat I believe! That's what happened for me.
So I bought a CRZ 2013 EX 6 MT 62000 miles. I will probably just be keeping it as a daily because I drive a lot for work. I had more pictures, but deleted them. I ordered some basic stuff off the rip.
I had to see how many gallons it would take, and in all seriousness this will probably...
That HPD Supercharger really caught my eye. I know it isn't something I'd ever be able to afford anytime soon, but I was wondering about it. Anyone who has or had one was it worth it? Also did you find yourself needing any other upgrades? I saw there was an exhaust upgrade, some body kit stuff...
Well, I'm officially the first HPD Supercharged CR-Z out in the wild. Ironically, that gets me serial number 002, since the 001 kit was the one used on the development car at HPD. Looks like I'll be alone for a while longer too, since my experience has uncovered confusion within Honda as to...
Little introduction:
Name is Beau - I am 32 years old and work in Software Development. I started working on Hondas when I was around 16, and have had quite a few cars through the years. In my late 20's I took some time away - bought a hybrid - and focused on life, but I have been having the...
Parts:
2014 Cr-z
Rsx sidewinder manifold, has to be kind of short. The crz doesnt have much room in the back, brake booster etc.
K20z3 and z3 tranny, rbc manifold
Stock crz shifter Accord v6 shifter cables Custom shifter cable bracket
Hasport mounts
Radiador swivel thermo. neck
D.S.S...
