[M1keBr0wn]

Some one is doing a k24 swap in a ZF2 chassis in Malaysia. He needs a ZF2 ECU pin outs.
If anyone can provide and share it, it will be very helpful to next all ZF2 K-swaps.
I have searched everywhere but could not find it. Even Helm's manuals don't have it. It is supposed to be in "Service Manual". Helms have other manuals but don't have this

Is the Zf2 ECU have 49 pins per plug. I have 2013 and just did a 9th gen si swap. I have the pin out.

 

[M1keBr0wn]

ITHe main thing is to see if your car chassis is Zf1 or Zf2. for Zf1 2007-11 si ecua nd harness will be used. For zf2 2013-15 will be used. but i have seen 2013 zf1 modles too. So the simplest way is to see if your CR-Z has S+ button or not. IF it has, use 2013-15 ECU and wiring. If not use 2007-11

Also Zf2 has a 49 pin connector at the ecu.


Sent from my iPhone using Tapatalk