CR-Z Wheel Fitment Thread - Honda CRZ Forum: Honda CR-Z Hybrid Car Forums

roddy · 03-21-2011, 06:28 PM

This thread will be dedicated to wheel fitment specific to the cr-z. please follow the format...

Wheel info:
wheel brand, diameter, width, offset, and face (if possible), weight of wheel (if possible).

Tire info:
sizing, and brand/model

Suspension info:
any info regarding drop

Pictures of the wheel fitment, minimum 3 pictures please. And please make the pictures relevant, rather than an artsy shot.

please post only if you have something to contribute. start a new thread or pm if you'd like to comment on someone's wheels/fitment.

roddy · 03-21-2011, 06:31 PM

Work vs-xx
17x8.5 +41 front, 17x9.5 +41
215/45/17 front, 235/45/17 rear
stock height, rubs in rear during large dips.

roddy · 03-21-2011, 06:34 PM

Super Advan ver. 2
18x7.5 +48 f/r
225/40/18 f/r
stock height, no rub

roddy · 03-21-2011, 11:23 PM

Work Meister s1 2piece
f:17x9 +34 A-disk w/ 205/40/17 falken 512
r: 17x9 +34 O-disk w/ 215/40/17 federal 595
Hks Hypermax 3 coilovers currently set to highest settings. will likely lower the car a little more.
no rubbing with this setup.

5/18/11: more loward

Vash337 · 03-21-2011, 11:32 PM

oh snap these are classy looking wheels for a crz

FS JIC Magic 07 Wheels, w/tires 2 brand new - Club RSX Message Board

sgtmorph · 03-22-2011, 03:12 AM

Wheel brand: Enkei RPF1
Wheel size: 17x9 +45
Tire size: 245/40-17 (brand unknown)
Suspension: OEM stock
Only mounted two wheels shown, so I dont know if they rub anywhere.

Vash337 · 03-22-2011, 09:45 AM

oOo it's a tight fit in the front. gloss black looks great on the red too. i like

sgtmorph · 03-22-2011, 02:21 PM

Quote:

Originally Posted by Vash337

oOo it's a tight fit in the front. gloss black looks great on the red too. i like

and thats actually the matte black you're seeing.......gloss black version
is even more shiny....lol

BasisSportTony · 03-22-2011, 09:05 PM

I went with the Spoon Blue color on my Axis Reverb wheels. They are identical to the Advan TCII wheels with the hollow spokes.

Wheels are 18x7.5 +45 with Falken 225/40R18

Overall Diameter is about the same.... Speedo reads 1 mph slower then stock.

Lowered on B&G S2 Lowering Springs. They have a great drop and ride very smooth.

AJ PwR · 03-22-2011, 09:28 PM

Spoon CR93 17x8.5 +53 offset with 225/45/17. Depending on the ride height so with stock height no rubbing issues.

I made it flusher with +5mm spacers at the front and 3mm at the rear !

Thanks
Ben

03-21-2011, 06:28 PM	#1 (permalink)
roddy Senior Member Join Date: Oct 2010 Location: san jose, ca Posts: 1,019	CR-Z Wheel Fitment Thread This thread will be dedicated to wheel fitment specific to the cr-z. please follow the format... Wheel info: wheel brand, diameter, width, offset, and face (if possible), weight of wheel (if possible). Tire info: sizing, and brand/model Suspension info: any info regarding drop Pictures of the wheel fitment, minimum 3 pictures please. And please make the pictures relevant, rather than an artsy shot. please post only if you have something to contribute. start a new thread or pm if you'd like to comment on someone's wheels/fitment. __________________ need an avatar? take one from my flickr have questiosn? fb me: www.facebook.com/roddy3 Last edited by bizzybear; 03-21-2011 at 06:49 PM.

03-21-2011, 06:31 PM	#2 (permalink)
roddy Senior Member Join Date: Oct 2010 Location: san jose, ca Posts: 1,019	Work vs-xx 17x8.5 +41 front, 17x9.5 +41 215/45/17 front, 235/45/17 rear stock height, rubs in rear during large dips. __________________ need an avatar? take one from my flickr have questiosn? fb me: www.facebook.com/roddy3

03-21-2011, 06:34 PM	#3 (permalink)
roddy Senior Member Join Date: Oct 2010 Location: san jose, ca Posts: 1,019	Super Advan ver. 2 18x7.5 +48 f/r 225/40/18 f/r stock height, no rub __________________ need an avatar? take one from my flickr have questiosn? fb me: www.facebook.com/roddy3

03-21-2011, 11:23 PM	#4 (permalink)
roddy Senior Member Join Date: Oct 2010 Location: san jose, ca Posts: 1,019	Work Meister s1 2piece f:17x9 +34 A-disk w/ 205/40/17 falken 512 r: 17x9 +34 O-disk w/ 215/40/17 federal 595 Hks Hypermax 3 coilovers currently set to highest settings. will likely lower the car a little more. no rubbing with this setup. 5/18/11: more loward __________________ need an avatar? take one from my flickr have questiosn? fb me: www.facebook.com/roddy3

03-22-2011, 03:12 AM	#6 (permalink)
sgtmorph Senior Member Join Date: Jan 2011 Location: West Islip, NY Posts: 1,203	Wheel brand: Enkei RPF1 Wheel size: 17x9 +45 Tire size: 245/40-17 (brand unknown) Suspension: OEM stock Only mounted two wheels shown, so I dont know if they rub anywhere. __________________ 2007 CIVIC EX 5MT (sold) 2011 CR-Z EX CVT (sold) 2011 CIVIC SI 6MT

03-22-2011, 09:28 PM	#10 (permalink)
AJ PwR Supporting Vendor Join Date: Aug 2010 Location: Richmond B.C. Posts: 245	Spoon CR93 17x8.5 +53 offset with 225/45/17. Depending on the ride height so with stock height no rubbing issues. I made it flusher with +5mm spacers at the front and 3mm at the rear ! Thanks Ben __________________ --------------------------------------------- A&J Racing International #155 - 1991 Savage Rd. Richmond B.C. V6V 0A4 TEL: (604)279-0329 Email: info@aj-racing.com URL: www.aj-racing.com Your JDM parts and Honda Tuning Specialist AJR Facebook GROUP http://www.facebook.com/profile.php?...0232140&ref=ts ----------------------------------------------

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode