![]() |
|
|
#1 (permalink) |
|
Junior Member
|
Here is what I have ordered for my own car, you might do the same - Ham Radio Outlet | DIAMOND NR-770HRKS | 2M/440 MOBILE 3/5.5DB UHF CONN same as - Diamond® Antenna ~ NR770HRKS Dualband Mobile Antenna Photo of the antenna base -
|
|
|
|
|
|
#2 (permalink) |
|
Member
Join Date: Mar 2011
Location: Orange, Texas
Posts: 75
|
Let me know how that works. I got my radio in my car but kinda temporary though. It is a Kenwood tm-261 and I have it plugged into accessory plug and it slid right into the little slot below the stereo and about the drink holders. I am using a mag mount right now run out of the top of the trunk. I think I am just gonna use my new hand held in there most of the time though. I would rather use the antenna you are talking about than a mag mount if it works well
|
|
|
|
|
|
#3 (permalink) |
|
Member
Join Date: Oct 2010
Location: Moorpark, CA
Posts: 87
|
I always had some Yaesu FT (7900, 8800 or similar with detachable head unit) in my cars and used all kind of antenna amounts including similar to what you are showing. I somehow could not find he right lace for the antenna. The back of the CRZ is so "smooth) that somehow the antenna would sort of ruin it.
I have a shorter (5/8) mag mount which I used with the Pilot and could use that from time to time but jury is still out. Also have two "long" 2m/44 diamond antenna which was used with the civic and use with Pilot for longer trips. I usually leave the main unit in the back of the cars so changing antenna is easy. Nothing installed as of yet ... |
|
|
|
|
|
#7 (permalink) |
|
Junior Member
|
keep an eye on this page - kd5yov.net/crz.htm ,
this is my own personal CR-Z page, and also my car's web page. 2011 Honda CR-Z - SPORT / HYBRID I have been uploading other photos and stuff here. |
|
|
|
|
|
#8 (permalink) |
|
Member
Join Date: Mar 2011
Location: Orange, Texas
Posts: 75
|
If I watch the S meter on my radio I can see it go up a lot when I hit the brakes or the electric assist kicks in. The radio does a good job of not breaking the squelch when it happens though. I don't hear the noise. Not sure if it is gonna affect anthing or not.
|
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|