![]() |
|
|
#1 (permalink) |
![]() Join Date: Jan 2010
Location: Sebastian, FL
Posts: 5,322
|
i thought of this b/c of the differences of this thread on the CVT "gear" ratios Gear Ratios (CVT) ... the JDM CVT is different from the USDM CVT... i also read before that the code was "LEA" in this thread i posted a while ago CR-Z - Technical Info i know the USDM model is "LEA1" as pictured below from when i went for a test drive... and i assume the CDM model is the same as the USDM model... what is the code on the EDM and JDM models?? ![]() in case anyone was curious, it seems every market uses the same IMA system...
__________________
Facebook: Roberto - Add me as a friend if you want ♫EDM♫ Fans - If you're a fan or just wanna listen Days to a Mile! - Join me on my journey to run a Marathon in 2011! INSANITY Workout!! - This is no joke haha! Last edited by bizzybear; 10-11-2010 at 07:18 PM. |
|
|
|
|
|
#2 (permalink) |
|
Senior Member
|
Mine reads LEA1 too as a USDM.
There are some slightly differences on official spec. between US, UK and JP web site. US: max horsepower @ 6000 rpm. max torque @ 1000-1750rpm (6MT) EU: max horsepower @ 6100rpm. max torque @ 1000-1500rpm JP: max horsepower @ 6000rpm. max torque @ 1000-1500rpm (6MT) The torque range on US model is where it gets interesting. BTW, I remember I've read someone on this forum said that there is minor difference between CARP CR-Z and non-CARP CR-Z. But he didn't say what it is. |
|
|
|
|
|
#5 (permalink) |
![]() Join Date: Jan 2010
Location: Sebastian, FL
Posts: 5,322
|
ok, now that we have the EDM-spec engine code... i guess we're just waiting on a JDM-spec CR-Z engine code...
oh, if you can Keeval, would u be able to take a picture like the one i posted
__________________
Facebook: Roberto - Add me as a friend if you want ♫EDM♫ Fans - If you're a fan or just wanna listen Days to a Mile! - Join me on my journey to run a Marathon in 2011! INSANITY Workout!! - This is no joke haha! |
|
|
|
|
|
#6 (permalink) |
|
Senior Member
Join Date: Jul 2010
Location: Manchester, UK
Posts: 170
|
I should be able to sort something out tomorrow - where on the actual engine is the number/code? (I got the model code from my V5 registration document when I responded above).
__________________
UK spec Crystal Black Pearl CR-Z GT 6MT |
|
|
|
|
|
#7 (permalink) |
![]() Join Date: Jan 2010
Location: Sebastian, FL
Posts: 5,322
|
right here... you can actually see the corner of the radiator reservoir in my picture
![]()
__________________
Facebook: Roberto - Add me as a friend if you want ♫EDM♫ Fans - If you're a fan or just wanna listen Days to a Mile! - Join me on my journey to run a Marathon in 2011! INSANITY Workout!! - This is no joke haha! Last edited by bizzybear; 10-28-2010 at 08:22 PM. |
|
|
|
|
|
#9 (permalink) |
![]() Join Date: Jan 2010
Location: Sebastian, FL
Posts: 5,322
|
yes, i understand what you're saying... but i NEED to see this
thanks
__________________
Facebook: Roberto - Add me as a friend if you want ♫EDM♫ Fans - If you're a fan or just wanna listen Days to a Mile! - Join me on my journey to run a Marathon in 2011! INSANITY Workout!! - This is no joke haha! |
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|