Lamin-X Headlight, Tail Light and Fog Light Lens Tint - Page 2 - Honda CRZ Forum: Honda CR-Z Hybrid Car Forums

sohcsol · 02-22-2012, 05:49 AM

Brad, just thought Id point out that the installed Charcoal film pics are labelled as "gunsmoke", not sure if those are the same thing.

autocity-brad · 02-22-2012, 10:42 AM

Woops...thanks for catching that, it has been fixed

Nasa · 02-29-2012, 06:45 PM

how hard is it to get the lamin-x to go over the bump on the tail light? it seems like it might bubble or wrinkle there.

harley888 · 03-01-2012, 01:13 AM

pm

autocity-brad · 03-01-2012, 02:38 PM

The tail lights are pretty difficult to install, we would recommend professional installation if you aren't experienced. Also, the pictures were taken right after installation, the bubbles will disappear after the film settles and bonds.

shaggy · 05-21-2012, 05:50 PM

had the headlights and tail lights done locally. i bought some tint on ebay but didnt think i could do it. it took the guy a few times to get it to stop coming up due to the bumps in the lights. but now that its done it looks awesome.

02-22-2012, 05:49 AM	#11 (permalink)
sohcsol Senior Member Join Date: Nov 2010 Location: Sarasota, FL Posts: 564	Brad, just thought Id point out that the installed Charcoal film pics are labelled as "gunsmoke", not sure if those are the same thing. __________________ 2011 CR-Z EX, 6MT, CBP, #7960

02-22-2012, 10:42 AM	#12 (permalink)
autocity-brad Supporting Vendor Join Date: Sep 2011 Location: Michigan Posts: 50	Woops...thanks for catching that, it has been fixed __________________ Brad Lenard www.autocityimports.com 586-797-9083 2011+ CR-Z Performance Parts

03-01-2012, 02:38 PM	#15 (permalink)
autocity-brad Supporting Vendor Join Date: Sep 2011 Location: Michigan Posts: 50	The tail lights are pretty difficult to install, we would recommend professional installation if you aren't experienced. Also, the pictures were taken right after installation, the bubbles will disappear after the film settles and bonds. __________________ Brad Lenard www.autocityimports.com 586-797-9083 2011+ CR-Z Performance Parts

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-29-2012, 06:45 PM	#13 (permalink)
Nasa Member Join Date: Feb 2012 Location: OLD FORGE, PA Posts: 36	how hard is it to get the lamin-x to go over the bump on the tail light? it seems like it might bubble or wrinkle there.

03-01-2012, 01:13 AM	#14 (permalink)
harley888 Member Join Date: Jan 2012 Posts: 113	pm