Gauging Interest: T1R B-Max Street Coilovers!? - Honda CRZ Forum: Honda CR-Z Hybrid Car Forums

AJR Jay · 01-18-2012, 06:16 PM

Just like the topic title says, this is a gauging interest thread in regards to possibly developing a new set of coilovers for the Honda CRZ.

We are possibly planning on developing a coilover system for the CRZ geared towards daily street use as well as spirited cornering and some occasional track use. The coilovers will feature both ride height adjustable as well as dampening adjustable rebound and compression.

We wish to present these coilovers at an affordable price to consumers while maintaining our top of the line quality.

If we can generate enough interest, we should be able to get a group buy for these!

Any input would be greatly appreciated as we are currently in planning phases.

Thanks!

Jason @ AJR

Debello · 01-18-2012, 06:18 PM

I have been looking for set of coilovers, if the price is reasonable, I would add these my other T1R stuff on the car.

kenoshainflames · 01-18-2012, 07:11 PM

depends on the spring rate. I'm looking for a 6-8k spring.

jdmsneakerhead · 01-18-2012, 09:41 PM

how about a c-pillar bar as well

AJ PwR · 01-19-2012, 02:54 PM

Pricewise we are working something around $800-$1000 mark.

The suspension will maintain a wide range adjustability but the dampening will lean towards comfort side.

Quote:

depends on the spring rate. I'm looking for a 6-8k spring.

Standard springs will be F.6k R.4k but if we get this on going, we can order 8&6k for you.

Quote:

how about a c-pillar bar as well

C-pillar will be the tough part. As I recall, the USDM CRZ has lights around the C-pillar area so most like you may have to remove it and cut before you can have one installed. I bet most ppl may not want to do that unless we supply 2 pre-cut covers but that will cost quite a lot.

kenoshainflames · 01-19-2012, 03:28 PM

very interested. shipping is gonna be crazy expensive from Canada though.

B-rad · 01-19-2012, 07:48 PM

Quote:

Originally Posted by kenoshainflames

very interested. shipping is gonna be crazy expensive from Canada though.

Also interested but yes it was like 150-200 for them to ship my seat which was oversized and only weighed 15lbs so hopefully the weight on these won't cause it to be that much

AJR Jay · 01-20-2012, 03:14 PM

Quote:

Originally Posted by B-rad

Also interested but yes it was like 150-200 for them to ship my seat which was oversized and only weighed 15lbs so hopefully the weight on these won't cause it to be that much

Coilovers won't be that expensive to ship out. We should be able to work out a pretty good price for shipping via ground shipping.

The reason why shipping for the seat was so much more was because of such a large box.

Let me know if you have any other questions or concerns.

Thanks.

Jason @ AJR

B-rad · 01-20-2012, 08:49 PM

Quote:

Originally Posted by AJR Jay

Coilovers won't be that expensive to ship out. We should be able to work out a pretty good price for shipping via ground shipping.

The reason why shipping for the seat was so much more was because of such a large box.

Let me know if you have any other questions or concerns.

Thanks.

Jason @ AJR

Ya that's what I thought

AJR Jay · 01-26-2012, 08:47 PM

I'm curious to know what kind of preference you guys might be looking for regarding the coilovers?

Feel free to post your input and we'll try to make it all happen!

Thanks.

Jason @ AJR

01-18-2012, 06:16 PM	#1 (permalink)
AJR Jay Supporting Vendor Join Date: Sep 2010 Location: Richmond, BC Posts: 459	Gauging Interest: T1R B-Max Street Coilovers!? Just like the topic title says, this is a gauging interest thread in regards to possibly developing a new set of coilovers for the Honda CRZ. We are possibly planning on developing a coilover system for the CRZ geared towards daily street use as well as spirited cornering and some occasional track use. The coilovers will feature both ride height adjustable as well as dampening adjustable rebound and compression. We wish to present these coilovers at an affordable price to consumers while maintaining our top of the line quality. If we can generate enough interest, we should be able to get a group buy for these! Any input would be greatly appreciated as we are currently in planning phases. Thanks! Jason @ AJR __________________ --------------------------------------------- A&J Racing International #155 - 1991 Savage Rd. Richmond B.C. V6V 0A4 TEL: (604)279-0329 Email: info@aj-racing.com URL: www.aj-racing.com Your JDM parts and Honda Tuning Specialist ---------------------------------------------- Last edited by AJR Jay; 01-18-2012 at 06:34 PM.

01-26-2012, 08:47 PM	#10 (permalink)
AJR Jay Supporting Vendor Join Date: Sep 2010 Location: Richmond, BC Posts: 459	I'm curious to know what kind of preference you guys might be looking for regarding the coilovers? Feel free to post your input and we'll try to make it all happen! Thanks. Jason @ AJR __________________ --------------------------------------------- A&J Racing International #155 - 1991 Savage Rd. Richmond B.C. V6V 0A4 TEL: (604)279-0329 Email: info@aj-racing.com URL: www.aj-racing.com Your JDM parts and Honda Tuning Specialist ----------------------------------------------

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-18-2012, 07:11 PM	#3 (permalink)
kenoshainflames Senior Member Join Date: Aug 2010 Location: wisconsin Posts: 931	depends on the spring rate. I'm looking for a 6-8k spring.

01-18-2012, 09:41 PM	#4 (permalink)
jdmsneakerhead Member Join Date: Oct 2011 Posts: 33	how about a c-pillar bar as well

01-19-2012, 03:28 PM	#6 (permalink)
kenoshainflames Senior Member Join Date: Aug 2010 Location: wisconsin Posts: 931	very interested. shipping is gonna be crazy expensive from Canada though.