Basis Sport Tuning parts Interest. - Honda CRZ Forum: Honda CR-Z Hybrid Car Forums

BasisSportTony · 10-26-2011, 04:23 PM

We are planning on making out own rear sway bar that is more affordable then the Progress or Cusco. Right now we plan on making something slightly stiffer then the Cusco 16mm and slightly smaller then the Progress 19mm. Would there be an interest in a 18mm sway bar at the moment?

Also we plan on making our own down pipe in a 60mm piping to mate up with aftermarket exhaust systems as a direct bolt on to some of the other systems on the market. Figuring that the P2R pipe is too big to be a direct bolt on we plan on making it slightly larger then the stock but not too big to not bolt on to the factory exhaust. This should eliminate any bottle necking to the exhaust which the competitors test pipe does.

If we can get a big enough interest we will be making these in the next few weeks.

Thanks!

kenoshainflames · 10-26-2011, 04:29 PM

you should look into making a J's racing style dolphin tip axle back.

JCRZ · 10-26-2011, 05:19 PM

def interest in the test pipe.

JCRZ · 10-26-2011, 05:20 PM

be nice to see parts that are cost effective, not an arm and a leg for something thats not worth an arm and a leg lol.

BasisSportTony · 10-26-2011, 05:28 PM

We are already working with ARK with the development of a dolphin tipped cat back exhaust. The prototype has already been shipped back for final production.

ArtJDM · 10-26-2011, 05:40 PM

What do we mean by dolphin tipped?

kenoshainflames · 10-26-2011, 05:45 PM

Quote:

Originally Posted by ArtJDM

What do we mean by dolphin tipped?

kinda like stock/ksk tipped

Klasse Act · 10-26-2011, 06:17 PM

I was quoted $150 to have the 2nd cat removed and have a straight pipe put in its place w/ an 02 bung welded in there too but if someone can make something that's already done and all they'd have to do is cut and replace, I'd be all for that!

Kyleseghatch · 10-26-2011, 06:20 PM

Interested in all of the above.

christopher · 10-26-2011, 07:11 PM

any pics tony?

10-26-2011, 05:19 PM	#3 (permalink)
JCRZ Senior Member Join Date: Sep 2010 Location: West Hartford, CT Posts: 1,781	def interest in the test pipe. __________________ "For those 17 seconds or more, I'm free..."

10-26-2011, 05:20 PM	#4 (permalink)
JCRZ Senior Member Join Date: Sep 2010 Location: West Hartford, CT Posts: 1,781	be nice to see parts that are cost effective, not an arm and a leg for something thats not worth an arm and a leg lol. __________________ "For those 17 seconds or more, I'm free..."

10-26-2011, 05:40 PM	#6 (permalink)
ArtJDM Supporting Member Join Date: Jan 2011 Location: Tampa Bay Area, FL Posts: 1,621	What do we mean by dolphin tipped? __________________ Buy CR-Z Forum Stuff from the new forum store!!! ArtJDM's Build Thread

10-26-2011, 06:17 PM	#8 (permalink)
Klasse Act Senior Member Join Date: Sep 2011 Location: Woodridge IL, USA Posts: 1,101	I was quoted $150 to have the 2nd cat removed and have a straight pipe put in its place w/ an 02 bung welded in there too but if someone can make something that's already done and all they'd have to do is cut and replace, I'd be all for that! __________________ 2011 SSM CR-Z EX/6MT Surface protection count...(48) v..JOIN US..v https://www.youtube.com/watch?v=K16Y...e_gdata_player

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-26-2011, 04:29 PM	#2 (permalink)
kenoshainflames Senior Member Join Date: Aug 2010 Location: wisconsin Posts: 931	you should look into making a J's racing style dolphin tip axle back.

10-26-2011, 06:20 PM	#9 (permalink)
Kyleseghatch Senior Member Join Date: Oct 2011 Location: Washington Posts: 1,099	Interested in all of the above.