CRZ 4 Pt. Roll Cage Interest? - Honda CRZ Forum: Honda CR-Z Hybrid Car Forums

BasisSportTony · 08-30-2011, 04:24 PM

We built this roll cage for the Eibach CRZ during SEMA and wanted to see if anyone was interested in purchasing one for their CRZ.

kenoshainflames · 08-30-2011, 04:50 PM

depending on price id love one.

91CRXTC · 08-30-2011, 04:54 PM

:that:

Koala Yummies · 08-30-2011, 05:02 PM

I would be interested, I had an Autopower in my DC2R that I tracked regularly.

Would it be exactly to those specs? There are a few things that could be made a lot better in terms of safety. All the spherical bearings would have to go, harness bar welded to the main hoop, and widen the main hoop, there appears to be plenty of room and the hoop doesn't fully encompass the driver's or passenger's outer shoulder.

BasisSportTony · 08-30-2011, 06:06 PM

The roll cage can be customized in anyway to include the harness bar but we made the harness bar as a seperate piece as R&D for those who want to use just a harness bar.

The roll cage was made within an inch from the OEM trim panals that is why it looks like there is a large gap between the body panals and the hoop.

You would be looking at approximatly $750 dollars and that is including having the bar powdercoated to the color of your choice or standard black.

Koala Yummies · 08-30-2011, 06:10 PM

Thanks for clarifying, being able to have it somewhat customized is a big deciding factor.

roddy · 08-30-2011, 07:30 PM

i agree. good move with the powdercoat. infact, would u offer inshop install as well? i wouldn't mind the drive to get installed.

any chance to make one replicating the typical aluminum cusco style ones where it goes along the A pillars?

JCRZ · 08-30-2011, 07:57 PM

I call this biwinning

lldsandsll · 08-31-2011, 09:29 AM

That's actually a pretty good price.

kenoshainflames · 08-31-2011, 10:05 AM

Quote:

Originally Posted by lldsandsll

That's actually a pretty good price.

especially with the powdercoating. I think id get mine pink.

08-30-2011, 07:30 PM	#7 (permalink)
roddy Senior Member Join Date: Oct 2010 Location: san jose, ca Posts: 1,012	i agree. good move with the powdercoat. infact, would u offer inshop install as well? i wouldn't mind the drive to get installed. any chance to make one replicating the typical aluminum cusco style ones where it goes along the A pillars? __________________ need an avatar? take one from my flickr have questiosn? fb me: www.facebook.com/roddy3

08-30-2011, 07:57 PM	#8 (permalink)
JCRZ Senior Member Join Date: Sep 2010 Location: West Hartford, CT Posts: 1,781	I call this biwinning __________________ "For those 17 seconds or more, I'm free..."

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-30-2011, 04:50 PM	#2 (permalink)
kenoshainflames Senior Member Join Date: Aug 2010 Location: wisconsin Posts: 931	depending on price id love one.

08-30-2011, 04:54 PM	#3 (permalink)
91CRXTC Senior Member Join Date: Jun 2010 Location: Suffolk Long Island NY Posts: 1,635	:that:

08-30-2011, 05:02 PM	#4 (permalink)
Koala Yummies Senior Member Join Date: Dec 2010 Location: LA Posts: 320	I would be interested, I had an Autopower in my DC2R that I tracked regularly. Would it be exactly to those specs? There are a few things that could be made a lot better in terms of safety. All the spherical bearings would have to go, harness bar welded to the main hoop, and widen the main hoop, there appears to be plenty of room and the hoop doesn't fully encompass the driver's or passenger's outer shoulder.

08-30-2011, 06:10 PM	#6 (permalink)
Koala Yummies Senior Member Join Date: Dec 2010 Location: LA Posts: 320	Thanks for clarifying, being able to have it somewhat customized is a big deciding factor.

08-31-2011, 09:29 AM	#9 (permalink)
lldsandsll Senior Member Join Date: Oct 2010 Location: S. Florida Posts: 1,601	That's actually a pretty good price.