***New Exclusive Beatrush Performance Parts*** - Honda CRZ Forum: Honda CR-Z Hybrid Car Forums

KamiSpeed · 08-09-2011, 03:23 PM

Update on Page 3!!!

A 2mm aluminum under-panel improves airflow underneath the engine bay. Not only does it create down-force at high speeds, but it improves engine airflow by directing hot air out. We have to test it to make sure its a direct fit, but I'd say 95% it works. MSRP is looking to be about $240.

The Beatrush Front performance bar is a 22mm diameter bar bolting the front joints of the front arms to each other and the frame. It improves the rigidity of the front suspension for obvious reasons. Also needs to be tested, but this is most likely a direct fit. MSRP is looking at about $205. It also weighs only about 1.5 lbs so no issues with weight.

The Beatrush Front member support bar is an aluminum bar bolting the front arm mounts to each other and the frame. It improves the rigidity of the front suspension for obvious reasons and works best in conjunction with the front performance bar. Also needs to be tested, but this is most likely a direct fit. MSRP is looking at about $320. It also weighs only about 3.3 lbs.

Vash337 · 08-09-2011, 03:32 PM

very very nice

KamiSpeed · 08-09-2011, 03:38 PM

yea were excited they're releasing new products, we'll probably get a group-buy going once its been tested

kronzonly · 08-09-2011, 03:49 PM

Nice! I want!

KamiSpeed · 08-09-2011, 06:00 PM

speaking of, we need a car to test on in the central FL area, PM me if you're interested

SuiteMike · 08-09-2011, 06:11 PM

Hey Saku, it looks like a direct copy of the Cusco ones, if you got any of them in stock, Id say just line em or stack em on top of each other to see if holes dont match and what not...should help give you a good idea if it lines up well =P

KamiSpeed · 08-09-2011, 06:41 PM

Quote:

Originally Posted by SuiteMike

Hey Saku, it looks like a direct copy of the Cusco ones, if you got any of them in stock, Id say just line em or stack em on top of each other to see if holes dont match and what not...should help give you a good idea if it lines up well =P

yea not too worried about the two bars, more so with the underpanel

Tbot · 08-09-2011, 06:49 PM

I will be there this Friday... If need it to test, by all means, have fun!!!

roddy · 08-09-2011, 06:55 PM

interested in the pannel. let's hope fitment goes well.

zeropointzero · 08-09-2011, 07:44 PM

if you need a test car, mine is always available.

08-09-2011, 03:23 PM	#1 (permalink)
KamiSpeed Supporting Vendor Join Date: Dec 2010 Location: Orlando, Florida Posts: 994	*New Exclusive Beatrush Performance Parts* Update on Page 3!!! A 2mm aluminum under-panel improves airflow underneath the engine bay. Not only does it create down-force at high speeds, but it improves engine airflow by directing hot air out. We have to test it to make sure its a direct fit, but I'd say 95% it works. MSRP is looking to be about $240. The Beatrush Front performance bar is a 22mm diameter bar bolting the front joints of the front arms to each other and the frame. It improves the rigidity of the front suspension for obvious reasons. Also needs to be tested, but this is most likely a direct fit. MSRP is looking at about $205. It also weighs only about 1.5 lbs so no issues with weight. The Beatrush Front member support bar is an aluminum bar bolting the front arm mounts to each other and the frame. It improves the rigidity of the front suspension for obvious reasons and works best in conjunction with the front performance bar. Also needs to be tested, but this is most likely a direct fit. MSRP is looking at about $320. It also weighs only about 3.3 lbs. __________________ KamiSpeed \| InsideKami \| saku@kamispeed.com \| AIM: KamiRep Certified Dealer:WedsSports, HKS, GoPro, & Swift *We will beat or match competitor's prices* 407-352-7024 ext: 104 Last edited by KamiSpeed; 08-19-2011 at 11:47 AM.

08-09-2011, 03:38 PM	#3 (permalink)
KamiSpeed Supporting Vendor Join Date: Dec 2010 Location: Orlando, Florida Posts: 994	yea were excited they're releasing new products, we'll probably get a group-buy going once its been tested __________________ KamiSpeed \| InsideKami \| saku@kamispeed.com \| AIM: KamiRep Certified Dealer:WedsSports, HKS, GoPro, & Swift *We will beat or match competitor's prices* 407-352-7024 ext: 104

08-09-2011, 06:00 PM	#5 (permalink)
KamiSpeed Supporting Vendor Join Date: Dec 2010 Location: Orlando, Florida Posts: 994	speaking of, we need a car to test on in the central FL area, PM me if you're interested __________________ KamiSpeed \| InsideKami \| saku@kamispeed.com \| AIM: KamiRep Certified Dealer:WedsSports, HKS, GoPro, & Swift *We will beat or match competitor's prices* 407-352-7024 ext: 104

08-09-2011, 06:55 PM	#9 (permalink)
roddy Senior Member Join Date: Oct 2010 Location: san jose, ca Posts: 1,010	interested in the pannel. let's hope fitment goes well. __________________ need an avatar? take one from my flickr have questiosn? fb me: www.facebook.com/roddy3

08-09-2011, 07:44 PM	#10 (permalink)
zeropointzero Supporting Member Join Date: Sep 2010 Location: Orlando, FL Posts: 411	if you need a test car, mine is always available. __________________ '11 PWP, 6 spd, EX-Navi Heavily braced but slightly under powered.

08-09-2011, 03:49 PM	#4 (permalink)
kronzonly Senior Member Join Date: Aug 2010 Posts: 720	Nice! I want!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode